Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國,授權代理商廈門飛美泰貿易有限公司 Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國
首 頁 公司介紹 行業方案 產品信息 服務和支持 熱點新聞 招聘信息 留言板 聯系我們



美塞斯產品家族 當前位置:首頁 >> Fife產品首頁 >> Kamberoller® 

MicroSymat Offset Pivot Guide

Mycrosysmat The MicroSymat is a super compact electromechanical guiding system designed specifically for narrow-web guiding applications. This single-roll offset pivot guide is available with two standard roller faces: 3.15" (80 mm), and 3.94" (100 mm), with diameters of 1.97”, 2.95” and 3.94” (50 mm, 75 mm and 100 mm). Maximum allowed tension is 22.5 lbf (100 N).

Depending on your needs and sensor(s) selected, the MicroSymat delivers precise, reliable operation in edge, center or line guide applications. A Servo-Center transducer provides automatic guide centering to speed the setup and threading process, resulting in minimum downtime and reduced waste.


Key Features:

  • Compact design for highly accurate guiding under tight space constraints.
  • Fully proportional for fast, accurate guiding.
  • Cantilevered mounting for quick and easy web insertion.
  • Very high frequency response.
  • Precise actuator and DC servomotor.
  • Durable construction for low maintenance and long-lasting reliability.
  • Servo-Center transducer speeds setup and threading.
  • All standard Fife sensors and processors can be used for edge, center or line guiding.

Additional Specifications:


Roller Diameter:
Minimum 1.97" (50 mm)
Maximum 3.94" (100 mm)


Maximum Correction:
±0.32" (8 mm)


Maximum Allowed Tension:
Up to 22.5 lbf (100 N)

[返回上一頁]  [返回Fife產品主頁]
版權所有© 2006-2013 廈門飛美泰自動化科技有限公司 地址:廈門市廈門火炬高新區火炬東路11號創業大廈711單元 郵編:361009
電話: (86)592-2107107 2051408 傳真: (86)592-2107108 Email: [email protected] 網址:http://www.rbnffn.tw
建議分辨率1024X768,IE6.0以上瀏覽器,以獲得最佳效果。閩ICP備09031839號 技術支持:澤迅網絡