Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國,授權代理商廈門飛美泰貿易有限公司 Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國
首 頁 公司介紹 行業方案 產品信息 服務和支持 熱點新聞 招聘信息 留言板 聯系我們



美塞斯產品家族 當前位置:首頁 >> Fife產品首頁 >> LAB-10 

LAB-10 Actuator SE-22 Infared Sensor

The LAB-10 offers a variety of gear ratios to meet the needs of most applications. This rugged, high-thrust actuator provides shiftable loads from 4,400 to 8,400 lbs (1,996 to 3,810 kg), at speeds from 0.95 to 0.55 inch/sec (23 to 14 mm/sec). Standard actuator strokes range from 1" to 10" in 1" increments. Ball screw and nut design provides low-friction, efficient operation and eliminates the typical end of stroke sticking and/or the need for actuator limit switches. For use with Fife's CDP-01 Processor, this versatile actuator is widely used for steering guides, displacement guides, and unwind/rewind applications.


Key Features:

  • Flexible actuator provides a variety of gear ratios: 5:1, 7:1 and 9:1.
  • Reliable, accurate operation-shifting speeds up to 0.95 inch/sec (23 mm/sec).
  • Efficient two-belt drive with shiftable loads up to 4,400 to 8,400 lbs (1,996 to 3,810 kg) (using anti-friction bearings)
  • Clean, electronic operation.
  • Durable construction for continuous-duty reliability.
  • Nonsticking end-of-stroke design.
  • No limit switches required.
  • Compatible with all Fife automated guiding and positioning equipment.
  • Sized and configured to your requirements.

General Specifications:


Gearing Ratio:
5:1, 7:1 and 9:1
Motor Amps:
Maximum Design Thrust: 
440 to 840 lbf (1,957 to 3,736 N)
Maximum Shifting Speed:
0.55 to 0.95 inch/sec (14 to 23 mm/sec)
Maximum Shiftable Load:
4,400 to 8,400 lbs (1,996 to 3,810 kg) (using
anti-friction bearings)

[返回上一頁]  [返回Fife產品主頁]
版權所有© 2006-2013 廈門飛美泰自動化科技有限公司 地址:廈門市廈門火炬高新區火炬東路11號創業大廈711單元 郵編:361009
電話: (86)592-2107107 2051408 傳真: (86)592-2107108 Email: [email protected] 網址:http://www.rbnffn.tw
建議分辨率1024X768,IE6.0以上瀏覽器,以獲得最佳效果。閩ICP備09031839號 技術支持:澤迅網絡