Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國,授權代理商廈門飛美泰貿易有限公司 Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國
首 頁 公司介紹 行業方案 產品信息 服務和支持 熱點新聞 招聘信息 留言板 聯系我們
 

糾偏-檢驗



張力-控制



分切-卷取
美塞斯產品家族 當前位置:首頁 >> MAGPOWR產品首頁 >> PA-90 & PA-2 

PA-90 & PA-2 Power Amplifiers, 24 and 90 vdc
 
PA-90 & PA-2 Power Amplifiers, 29 and 24 vdc The PA-90 and PA-2 Power Amplifiers are designed to provide the extra current required for controlling magnetic particle brakes and clutches in any tension control application. For use with DIGITRAC II , EZ-Trac, or VERSATEC, the PA-90 and PA-2 can be mounted inside the control's enclosure, and receives its control signals directly from the tension control.  This unit also includes reverse current circuitry as a standard feature, thus allowing greater controllability in the lowest torque range of the clutch or brake being operated.

The PA-90 is used to control 90 VDC brakes and clutches only, while the PA-2 can be used to control either 24 or 90 VDC units. With 115 VAC input, either power amplifier will provide a 3.6 to 90 VDC, current regulated output to accurately control a 90 VDC brake or clutch. With a 24 VDC input, the PA-2 can also provide a 1.2 to 24 VDC, current regulated output to accurately control a 24 VDC unit.

The PA-90 and PA-2 Power Amplifiers are designed to provide the extra current required for controlling magnetic particle brakes and clutches in any tension control application. For use with DIGITRAC II , EZ-Trac, or VERSATEC, the PA-90 and PA-2 can be mounted inside the control's enclosure, and receives its control signals directly from the tension control.  This unit also includes reverse current circuitry as a standard feature, thus allowing greater controllability in the lowest torque range of the clutch or brake being operated.
The PA-90 is used to control 90 VDC brakes and clutches only, while the PA-2 can be used to control either 24 or 90 VDC units. With 115 VAC input, either power amplifier will provide a 3.6 to 90 VDC, current regulated output to accurately control a 90 VDC brake or clutch. With a 24 VDC input, the PA-2 can also provide a 1.2 to 24 VDC, current regulated output to accurately control a 24 VDC unit.

Specifications:
PA-2: With 115 VAC input: -3.6 to 90 VDC, with selectable current ranges 1/8, 1/4, 1/2 amp maximum 
With 24 VDC input: -1.2 to 24 VDC, with selectable current ranges 1/8, 1/4, 1/2, 1, 2 amp maximum
General Specifications:
Input:
PA-90: 115 VAC ±10%, 50/60 Hz 
PA-2: 115 vac+-10%, 50/60 Hz 24 vdc +-10%
Output:
PA-90 -3.6 to 90 VDC, with selectable current range 1/8, 1/4, 1/2 amp maximum

 


[返回上一頁]  [返回MAGPOWR產品主頁]
版權所有© 2006-2013 廈門飛美泰自動化科技有限公司 地址:廈門市廈門火炬高新區火炬東路11號創業大廈711單元 郵編:361009
電話: (86)592-2107107 2051408 傳真: (86)592-2107108 Email: [email protected] 網址:http://www.rbnffn.twhttp://www.feimeitai.com
建議分辨率1024X768,IE6.0以上瀏覽器,以獲得最佳效果。閩ICP備09031839號 技術支持:澤迅網絡

精准一尾中特论坛