Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國,授權代理商廈門飛美泰貿易有限公司 Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國
首 頁 公司介紹 行業方案 產品信息 服務和支持 熱點新聞 招聘信息 留言板 聯系我們



美塞斯產品家族 當前位置:首頁 >> MAGPOWR產品首頁 >> CL Series 

CL Cantilever Load Cells for Narrow Web
CL load cells
The CL Cantilever Load Cells are the most cost effective cantilever load cell on the market.  They are designed to support cantilevered idler rolls in processing machines which only have one side frame, and to accurately measure and control tension in a narrow moving web. They are typically used on paper, film, foil, wire, fiber, fabrics or any materials used in the label, tag, tape, printing or converting industry.

A unique advantage of these sensors is their ability to accept your roll and shaft assembly.You are no longer restricted in design - just install one of your own spare roll assemblies into the Model CL Load Cell.Another advantage of these load cells is the capability to be mounted inside or outside of the machine frame.This allows the process rolls to be mounted flush to the machine frame to minimize overhang when the sensor is mounted on the back side of the machine frame.Full Wheatstone bridge provides the best accuracy available.

The model CL Load Cells are ruggedly constructed with built-in mechanical overload stops. A full Wheatstone bridge arrangement is incorporated in each load cell for the most accurate means of measuring web tension. There are 2 sizes available with 5 tension sensing ranges up to 500 lbs.

General Specifications:

Inside or outside machine mounting

Rugged construction for long-life

Built-in mechanical stops

Rating IP67 for water wash-down & immersion

[返回上一頁]  [返回MAGPOWR產品主頁]
版權所有© 2006-2013 廈門飛美泰自動化科技有限公司 地址:廈門市廈門火炬高新區火炬東路11號創業大廈711單元 郵編:361009
電話: (86)592-2107107 2051408 傳真: (86)592-2107108 Email: [email protected] 網址:http://www.rbnffn.tw
建議分辨率1024X768,IE6.0以上瀏覽器,以獲得最佳效果。閩ICP備09031839號 技術支持:澤迅網絡