Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國,授權代理商廈門飛美泰貿易有限公司 Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國
首 頁 公司介紹 行業方案 產品信息 服務和支持 熱點新聞 招聘信息 留言板 聯系我們



美塞斯產品家族 當前位置:首頁 >> Tidland產品首頁 >> Winding Accessories 
Winding Accessories

Air inflation tools, roll savers and other important tools are required to optimize the effectiveness of your product line.  The accessories you purchase from Tidland are top quality, affordable items that save you time and money throughout your day.

Air Inflation Tool

Tidland Air Inflation Tools are a fast and efficient way to inflate shaft and chuck bladders and elements for optimal performance.

Recoiling Air Hose

Use this air hose to interconnect chucks on a mandrel or core shaft. Includes 1/4 NPT external brass fittings on each end. (1/4" x 12 ft.)

Air Hose with Fittings

Attach this abrasion-resistant air hose to an Air Inflation Tool. Includes 1/4 NPT external nylon fittings on each end. (1/4" x 10 ft.) Holds 150 psi (10.3 bar) pressure, maximum.

Air Release Tool

Tidland recommends using this Air Release Tool to helpensure operator safety when deflating shafts and chucks.

Punch and Gauge

For use with Tidland external elements, the Punch and Gauge shortens maintenance downtime by ensuring correct hole locations and diameters in new bladders and elements with having to measure each one.

Journal Puller Assembly

The Journal Puller Assembly is extremely helpful for maintenance personnel when removing press fit journals.

Mill Wedge

The Tidland Mill Wedge is made of tough ABS plastic and is primarily designed to separate paper rolls when web interweaving occurs.

Mark I Roll Saver

The Mark I Roll Saver is designed to restore 2-3/4" (70 mm) to 3" (76.2 mm) I.D. crushed cores with a manually operated hydraulic oil pressure pump.

Mark I Roll Saver Adapters

These adapters are available in three sizes and may be used in combination with the Mark I Roll Saver to restore 4" (101.6 mm), 5" (127 mm),
6" (152.4 mm) and 6 3/4" (171.5 mm) crushed cores.

Mark I Roll Saver Sledge Weight

The Sledge Weight is a useful tool for driving the Mark I Roll Saver into difficult cores. It's better, simpler, and safer than any type of sledgehammer 20 lb. (9 kg) weight.

Mark II Roll Saver

The Mark II Roll Saver is designed to restore 2-3/4" (70 mm) to 3" (76.2 mm) I.D. fiber cores. It is not recommended for steel or steel-tipped cores.

Drive Coupling & Universal Joint Assemblies

A Drive Coupling (on the brake shaft) and Universal Joint (on the core shaft) with the Tidland Air Brake may be used for transmitting torque to maintain web tension and ease shaft removal for roll changes.

[返回上一頁]  [返回Tidland產品主頁]
版權所有© 2006-2013 廈門飛美泰自動化科技有限公司 地址:廈門市廈門火炬高新區火炬東路11號創業大廈711單元 郵編:361009
電話: (86)592-2107107 2051408 傳真: (86)592-2107108 Email: [email protected] 網址:http://www.rbnffn.tw
建議分辨率1024X768,IE6.0以上瀏覽器,以獲得最佳效果。閩ICP備09031839號 技術支持:澤迅網絡